Project Settings

Project Descriptions Tab

The Project Settings mode enables you to specify project descriptions and address files that appear in title blocks and reports.

The Project Descriptions are displayed in a grid format as shown below with the description name in the left column with the description value in the right. Descriptions can be Added, Renamed and Removed using the toolbar icons.

Values for the descriptions are entered directly into the adjacent field. The values entered will be used as the defaults for the project.

Setting	Description
Add Description	Click this icon to add an additional description field to the grid. The Add Description dialog displays letting you define a name for the description: Enter a description into the field and click OK to add it.
Rename Description	Click on a description name and select this option to display the Rename Description dialog: Enter a new name for the description into the field and click OK to change it.
Remove Description	Select a description from the grid and click the icon to remove it from the list.
Reset	Resets the description values to their original setting.
Default Value	When a project is created, the default project value will be pulled from these default values.

Drawing Set/Installation/Location Descriptions

Lets the user add or rename Drawing Set, Installation and Location descriptions. The default value specified here will only be applied when the user creates a new instance of either of these. An example would be creating a new page that specifies a drawing set that was not previously used in the project. Existing description values are not overwritten when creating a new page that specifies an existing Drawing Set.

Note: The commands for these tabs are the same as the Project Descriptions described above.

The changes made in the Drawing Set, Installation or Location Descriptions tabs above would appear in the Project Manager > Drawing Set/Installation/Location tabs shown below:

Setting	Description
Address File	The default address will display here unless you select an different address from the drop down list.
New	Click to create and define a new Address File.
Delete	To delete an Address File, select the file and click Delete.
Address	Address can be viewed/edited in this section.
Address Logo	To add a logo (DGN file) to the address, use the Browse button to select the file.
Delete	Deletes the selected logo.
Location	The X-Coord and Y-Coord fields allow you to assign the position of the logo.

For this release, integration with the iModelHub is being introduced as a Technical Preview. The following settings are required to be able to connect and publish to the iModelHub.

Important: Note this is a Technical Preview and additional settings need to be configured before the Promis.e iModel integration can be realized. Please contact your Bentley representative for details.

Setting	Description
CONNECTED Project Name	Enter the name of the CONNECTED project that has been created and registered on the Bentley CONNECT Center. Having a project and iModel created on the CONNECT Center is a prerequisite for Promis.e to be able to publish to the site.
iModelHub cache path	Enter a local path to serve as a working directory for the iModelHub integration.

Publish Project to Server

Once all of the iModelHub settings have been defined, you are able to publish project data to the iModelHub.

Important: Note this also assumes that the project has been associated with a CONNECTED Project with an imodel created for it. The imodel is where your project data will be stored on Bentley's CONNECT Center.

When you right-click on one of your projects, the Publish Project to Server option has been added to the menu as shown:

When you select the option, the following dialog prompts you to create a named version:

Enter a version name and click OK to publish the project data to the iModelHub. A dialog similar to the following displays the publishing details/progress for the project:

Publish Pages to Server

When you right-click on one or more selected pages, the Publish Page to Server option has been added to the menu as shown:

When you select the option, the following dialog prompts you to create a named version:

Enter a version name and click OK to publish the page data to the iModelHub. A dialog similar to the following displays the publishing details/progress for the project: